Wattaroo01
IN THE BETA
Running-cost estimate
Type the wattage, the hours a day and your electricity rate. You get a monthly estimate for that one appliance.
APPLIANCE RUNNING COST
What does this appliance cost to run?
Type the wattage from the label and how many hours a day it runs. You get a monthly estimate in dollars. It is an estimate from your numbers, not your bill.
Estimates only · No smart plug · No camera scan on the web · Not affiliated with Con Edison, National Grid or any agency
Illustration. Not a real result or screen.
EXAMPLE RUNNING COST
/ month (estimate)
1,000 W × 4 h/day × 30 days × $0.30/kWh = $36 per month. Example input, not your rate. Estimate.
See how this is calculated
$0.30 per running hour · $1.20 per day · about $438 per year
WHAT WATTAROO DOES FOR THIS
Type the label, get the estimate.
On the web you type the details. A photo cannot measure electricity.
02
IN THE BETA
Model or label details
Type a model number or the wattage on the label. There is no camera scan on the web.
03
IN THE BETA
Official links
Programs we checked on each program’s own official page on October 31, 2026, listed by state. See the list. Checked means the page loads, names the program and says how to apply. We did not check eligibility, amounts or deadlines, so confirm them on the official page.
Guidance and official links only. You send any form yourself.
OFFICIAL HELP
Start with the official pages.
Wattaroo is not a utility or program administrator. It is not affiliated with Con Edison, National Grid or any agency. These are official places to check.
~13%
Higher
New York’s average residential electricity price was about 13% higher in January–June 2026 than in January–June 2025. This is our average of NYSERDA’s monthly figures, which come from U.S. EIA data.
An average price for the state, not your bill.
NYSERDA · U.S. EIA · updated Sept. 9, 2026 ↗OFFICIAL GUIDE
Find state programs
New York’s Energy Advisor provides official information about energy programs and resources.
Links only. Not re-checked for this page.
GOOD QUESTIONS
Before you use the estimate.
What goes into the estimate?
The wattage, the hours a day, the days a month and the electricity rate you enter. The example uses 1,000 W, 4 hours a day, 30 days and $0.30 per kWh.
Is this my real cost?
No. It is an estimate from the numbers you enter. It is not a meter reading or a guaranteed bill amount.
Where do I find the wattage?
Look for the label on the back, side or bottom of the appliance, or in its manual. Type the watts. If the label gives volts and amps instead, multiply volts by amps to get watts.
Does the camera measure electricity?
No. A photo cannot measure electricity, and there is no camera scan on the web. Type the model number or label details instead.
Do I need hardware?
No. You need no smart plugs, no panel work and no utility login.
OTHER QUESTIONS
Other household questions.
NATIONAL WAITLIST · PHASE 1 NYC BETA
Want to know what your appliances cost?
Join the waitlist to get an email when invites open. Joining is not access. The beta is small and invite-only, starting in New York City.
✓ No paid plans in the beta✓ No utility password✓ Bills read in your browser